Author Archives: Jeff McCauley

Remote Support Password Disable Firewall Reconfiguration Allow SSH on the LAN Disable remote support (VPN) Lock-Down Player [Enterprise Plan only] Warning! Before locking down your player, make sure that you have read the below information. Many configuration options will be disabled and you will need to have physical access to the player in order to unlock it. […]

9.9.1a Hide Diagnostics screen 9.9.1b Hide “Turning Off” message 9.9.1c Hide Player Processes messages 9.9.1d Show only icons for messages

Media Tag Filtering makes it easy to automatically tailor the type of content displayed on each screen by using media tags.  Most importantly, instead of creating a separate Playlist for a screen in London and another playlist for a screen in Dubai, for example, users can create a main playlist for all screens and locations and […]

You can use your Player for LED screens and LED billboards. To properly use an LED display, you must perform some calculations and configurations. Step 1: Setting the DVI resolution First, you must identify what resolution your LED display (or LED board controller, or LED sender card) requires as input. This is usually called the […]

Resolution The Playbox (based on the Raspberry Pi) automatically detects on start-up the “preferred” resolution of the connected monitor (usually, its native resolution).  Sometimes, the resolution might not be detected properly.  This might happen if you power up your Playbox without a screen connected or if, after a power failure, the Playbox starts before the […]

The Basic tab contains the following settings: Time Zone and Schedules