Category: Video-Walls

The “Video Input” option allows you to connect any USB video input device to your Players to display a video feed on your screens.  The typical use is an HDMI-in port; you connect a USB HDMI capture card and connect through HDMI to your set-top box receiver (satellite, cable, or terrestrial) to show live video along […]

Video playback does not start on the Video-Wall, while I can see it working on the “Master” Player Video playback is not smooth. There are stuttering and glitches. The video seems of low quality. The screens on the Video Wall are not 100% synced.

You can set up any Video-Wall, as long as screens are mounted in landscape or portrait orientation. So, you can create video-walls like this one: If you wanted to do bezel compensation or set up an asymmetric video-wall, you need to measure actual distances between the screens’ viewable areas.  Use the Test Card above and […]

By “tiled,” we mean matrix setups that are not NxN, e.g., a 3×1 “ribbon-like” setup: Percentages are calculated in the same way as if the Video-Wall was an NxN setup, including the missing screens. You need to place your content in the Layout editor’s right area since the rest will not be shown.

End of Life LKV373A Required equipment Connecting everything together Making sure everything works (correctly) Steps in your Account Here are the steps you need to follow to configure a Video-Wall in your account. Create 1 Streaming Video entry for each screen. Create 1 Layout for each screen. TIP: The assigned media on the Master player does […]

You can build an affordable and impressive video wall setup using your Digital Signage Players. You need to configure each of your screens manually. To do that for simple matrix-like video walls, like 1×3, 2×2, or 3×3, is really easy. Steps in your Account Here are the steps you need to follow to configure a Video-Wall in […]